or call 800-861-9712call 800 861 9712 to order to order!
The Childcare Kit from ITS was designed to meet Childcare Sanitation rules for testing sanitizer and disinfecting solutions
- Easy-read color blocks ensure accuracy
- No dilution required
- Laboratory quality results reduce liability
- Approved for use in child care centers
- Safe, non-hazardous, easy-to-use
- Made in the U.S.A.
Sanitizing Solution
- Label a clean 1 quart container "Chlorine Sanitizer" with a permanent marker
- Add 1 capful of liquid chlorine bleach (such as Clorox) to the container.
- Place the cap on the container and shake it well.
- Some of the bleach will cling to the container wall. Remove the cap from the container and discard the bleach that does not cling to the wall.
- Fill the container to about 1 inch from the top with tap water and shake it well.
Disinfecting Solution
- Label a clean 1 quart container "Chlorine Disinfectant" with a permanent marker.
- Add 1 tablespoon of liquid household bleach to one quart of water.
- Fill the container to about 1 inch from the top with tap water and shake it well
- Or, for bulk containers of one gallon in size add one-quarter cup of liquid household bleach. Fill the container to about 1 inch from the top with tap water and shake it well.
Testing your solution
- Dip one test strip into a water sample for 1 second.
- Remove the strip and shake once (away from face), briskly, to remove excess water.
- Wait 1 minute.
- Match to the color chart below. Complete color matching within 15 seconds
Kit Contains:
- 3 bottles of test strips (100 strips per bottle)
- Sanitizer preparation method instructions
- 1 tablespoon measurer
- 1/4 cup measurer