SenSafe High Range Ozone

The SenSafe® High Range Ozone Test Strips provide a fast, simple, and reliable method for measuring elevated dissolved ozone concentrations in water. Designed for applications where ozone levels exceed the range of traditional low-level test strips, these strips deliver accurate visual results in seconds without the need for reagents, instruments, or calibration.

Ideal for ozone generation systems, equipment validation, process verification, and high-strength ozone applications, SenSafe High Range Ozone strips make routine monitoring quick and cost effective.

Features & Benefits

• High-range ozone detection from 0 to 6.0 ppm (mg/L)
• Results in approximately 25 seconds
• No reagents or hazardous chemicals required
• Easy dip-and-read procedure
• Individually engineered color chart for accurate visual comparison
• Bottle of 50 test strips
• Made in the USA
• Ideal for field or laboratory use

How to Use

1. Dip the test strip into the water sample for 10 seconds using a gentle back-and-forth motion.
2. Remove the strip and shake off excess water.
3. Wait 15 seconds.
4. Compare the test pad to the color chart on the bottle to determine the ozone concentration.

Total Test Time: Approximately 25 seconds

Typical Applications

• Commercial ozone systems
• Food and beverage processing
• Produce washing
• Bottled water production
• Industrial water treatment
• Pharmaceutical manufacturing
• Medical device sterilization systems
• Surface sanitation systems
• Research laboratories
• Process verification and equipment commissioning

Why Test Ozone?

Maintaining the proper ozone concentration helps ensure treatment systems are operating effectively while avoiding under- or over-dosing. Regular testing helps verify ozone generator performance, optimize process efficiency, and document treatment conditions for quality control.